Cross Stitch Canvas

Cross stitch fabric count guide

Compare 14-count and 18-count Aida with evenweave, and work out the fabric cut with enough room to finish.

What fabric count means

On Aida, the count tells you how many stitch squares fit in an inch. A 70 × 56-stitch design is 5 × 4 inches on 14-count Aida. On 18-count Aida it’s about 3.9 × 3.1 inches. The same chart uses the same number of crosses on either fabric.

On evenweave and linen, count generally describes the fabric threads per inch. With 28-count evenweave stitched over two threads, the effective stitch count is 14 per inch. Enter both the fabric count and the worked-over value when using a calculator.

Leave room on each edge

The stitched size covers the chart area. The cut size includes the extra fabric your hoop or frame needs. For a 5 × 4-inch design with a 3-inch allowance on each edge, add 6 inches to each dimension and cut 11 × 10 inches.

Check the finishing instructions before cutting. A hoop finish, a pillow, and a piece laced around mounting board can call for different allowances. If you buy fabric by the quarter or from a remnant bin, check both dimensions of the usable piece.

Choose a count you can see comfortably

Hold a scrap in the light where you usually stitch. A finer count can fit more stitches in a small hoop, while a coarser count gives you more room to see the holes. Stitch a few dark crosses on a light scrap to check both coverage and comfort before buying enough fabric for a large project.

Calculate your fabric cut

DMC cross stitch guide